We had a carb party the Saturday before last and got some work done. It was a bit nippy out so we worked in the sweltering heat of Funkz apartment. My carbs are ready to be slapped back on and balanced/tuned. RedQueen's carbs are waiting on the new set of floats and a bit of advice from Rob @ CRC2. The other guy said there's nothing except the press in jet in the mystery passage. But that answer doesn't sit well with me, so time to get a 2nd opinion. Funkz carbs are back in their bank and ready to go. Man, putting the choke assembly in the 750 bank is not the easiest task.
While at CRC2, a strange thing happened. We actually taught them something new. I know, sounds incredible but it's true! Rick had never heard of boiling carbs in lemon juice and water to clean them. (Granted, I hadn't either until about 4 weeks ago) But hey, you gotta take your compliments when you get 'em. We didn't get all the parts we needed but enough to get some work done.
We're still searching for a caliper rebuild kit but I think the early cb750 used the same caliper. If so, we're in like Flynn. This Saturday we'll be picking up fork seals, brake pads and hopefully the rebuild kit. I'm not sure if we'll get shop time this weekend but I'm gonna try. The 350 and the 450 are moving along at a good pace. Both should be ready by spring, if not sooner.
Project Frankencycle only needs some the stock air boxes and new tires. The rest is just fine tuning. Before we do any test starts, I want to check the cam timing again and the valve clearance. Bride of Frankencycle just needs new sprockets, chain, tank and clutch pack. Nothing major at all.
If luck goes our way, we'll be taking the ABATE course this spring. Should be fun and educational. We still have to get RedQueen a good helmet and some gloves. She's really looking forward to learning and riding. It will be a great day when all the bikes roll out and fire up.